 |
You
can’t find a better rear spindle than what
we offer. These are drop forged and produced to
the exact appearance and dimensional specifications,
but with superior metallurgy to the original part.
As you know, the rear spindle / bearing assembly
has been the Achilles heel of these C-2 and C-3
Corvettes. The design was ahead of the materials.
Now the materials have caught up. By the way, in
case you are wondering why we should show a C-4
Corvette on our 63-82 Corvette website; its is actually
the same 80 Corvette pictured on the top of the
80-82 Diff page. We rebodied it in 1988 to run the
car in the Dallas Grand Prix Trans Am race. We finished
7th. |
|
|
65
- 82 Rear Spindle Overhaul Kit
Changing spindles is a big deal, so when you have
to do it, you want to change everything that is
virtually impossible to change with the spindles
in place. Included is one car set of aircraft quality
drop forged new spindles, shim and spacer kit, bearings,
seals, backing plates, SS parking brake parts, shoes,
spindle small parts kit, Mobil One synthetic wheel
bearing grease, and instructions. Don't waste any
of the Mobil 1, as there is none to spare when doing
two assemblies. Specify
Year - Free Freight |
|
$448
Part # SP010
|
|
|
$7
Part
# SP140
Add
for second tube of Mobil 1 |
| |
|
|
| |
Corvette
Spindle Installation Tools
The proper installation of the
63 - 82 spindle all but requires the proper tools.
This set includes a new spindle knocker, and used
but perfect spindle installation and set-up tools.
When you finish with these tools, you can return
the still perfect set-up and installation tools
for a $140 refund. Throw in your unused spindle
shims for an additional refund of $1 each.
Free
Freight |
|
$198
Part
# SP015
|
|
 |
63
- 82 Spindles w/ Bearings & Seals
For those of you with quality backing plates and parking
brake parts, this kit may be the way to go. Included
is one car set of aircraft quality spindles, plus new
Timken bearings, seals and Mobil 1.
Free Freight
|
|
$264
Part
# SP020
(For
65-82 Models) |
|
$324
Part
# SP022
(For
63-64 Models) |
|
|
 |
63
- 82 Corvette Rear Spindle
If this is all you need, you have come to the right
place. You can't buy a better spindle. It is drop forged,
then case hardened to yield a part with superior metallurgy
to that available when this part was designed in 1962.
Free Freight
|
|
$115
Part
# SP030
(For
65-82 Models)
|
| $136
Part
# SP032
(For
63-64 Models) |
|
|
 |
63
- 82 Rear Bearings & Seals
If your spindle survived a bearing failure and you were
successful in removing it without further damage, then
you are both lucky and good. This is one wheel set of
rear spindle bearings and seals. You can choose between
Timken and bearings from China. We only use Timkins
in the parts we build and in the cars we service, but
we have never had a complaint on the generic bearings.
Free Freight |
$36
Part
# SP040
Timken
Bearings
and Seals
| $26
Part
# SP042
Generic
Bearings
and Seals
|
|
|
 |
65
- 82 Corvette Backing Plate
Also known as Dust Shields, these come in Silver for
65-75, and Gold for 76-82.
Specify Year & Left or Right
- Free
Freight
|
$29
Part
# SP050
|
|
 |
65
- 82 Corvette Parking Brake Kit
This kit has everything you need to rebuild (replace)
both sides of your 1965 (with disk brakes) to 1982 Corvette
parking brakes. The hardware is all stainless steel;
the shoes are OEM. Free
Freight |
$67
Part
# SP060
|
|
|
|
SS
Parking Brake Parts
This is one car set of all the stainless steel parking
brake hardware located inside the brake shoes.
Free Freight |
$36
Part
# SP061
|
|
|
|
Parking
Brake Shoes
This is one car set of zinc plated parking brake shoes.
Free Freight |
$38
Part
# SP062
|
|
 |
67
- 82 Front Parking Brake Cable Kit
The cable is Stainless Steel, the pulley nylon.
Free Freight
|
$33
Part
# SP070
|
|
 |
65
- 82 Rear Parking Brake Cable Kit
This Stainless Steel cable kit contains the 4 Mickey
Mouse clips and the nylon cable guides that mount on
the trailing arms. Free
Freight |
|
|
 |
63
- 82 Corvette Spindle Shim Kit
These nine stainless steel shims will give you all you
would typically need to set up the end play to between
.001 and .008 inch. Included are spacers of .097, .103,
.109, .115, .121, .127, .133, .139, and .145 - Free
Freight |
$29
Part
# SP090
|
|
 |
63
- 82 Corvette Rear Spindle Shim & Spacer Kit
These are not a crush sleeves! You normally don't need
to replace the spacers, but some people want them, so
here are nine shims and two spacers. Free
Freight |
$36
Part
# SP100
|
|
| |
65
- 82 Rear Spindle Small Parts Kit
One part number for a car set of all the hard to find
miscellaneous parts required for a quality spindle overhaul.
Most are original GM parts including Dust Shields, Deflector
Flanges, Bolt Locks, and Parking Brake Shoe Hold Down
Plates. Free
Freight |
$26
Part
# SP110
|
|
 |
63
- 82 Rear Spindle Support Housing
Reconditioned and perfect, with Free
Freight |
$116
Part
# SP120
|
|
 |
Loaded
Spindle Housing
This housing is ready for your spindle. It has Timken
bearings and seals, and has been set up with the correct
spacer and shim. It is shipped shrink wrapped, fully greased
with Mobil 1, and includes a new inner bearing shield.
If you use this housing, you don't have to worry about
the setup, as we have done that for you. All you need
is an installation tool to install your spindle. We can
include our installation tool for $70, and when you are
finished I will give you back $85 for the return of the
installation tool and your old rebuildable spindle support
housing. Specify driver side or passenger side.
Free Freight |
| $233
Part
# SP124 |
| |
$80
Part
# SP125
Spindle
Installation Tool |
| |
|
|
 |
63
- 79 Corvette Rear Spindle Flange
Reconditioned and as perfect as it can be. Free
Freight |
$68
Part
# SP130
|
|
 |
80
- 81 Automatic Rear Spindle Flange
Either Brand New GM, or as good as new. Free
Freight |
$118
Part
# SP132
|
|
| 
|
80-81
Manual & All 82 Spindle Flange
Reconditioned, the best available - Check Stock! Free
Freight
|
$184
Part
# SP134
|
|
 |
Mobil
One Synthetic Grease
I believe this is the best grease in the world for this
application. One tube is enough for one spindle, and if
you don't waste any, its enough for two. Remember for
Free Freight, there is a $20 minimum order. Orders of
less than $20 are charged $5 freight
|
$8
Part
# SP140
|
|
